The Hidden Value You Are Throwing Away
Every VCP (Vertical Continuous Plating) line, horizontal pulse plating bath, and copper recovery etching cell in a PCB fab uses advanced Insoluble MMO (Mixed Metal Oxide) titanium anodes. Unlike traditional soluble phosphorized copper ball anodes that dissolve away, these titanium anodes are designed to last 2–5 years — but once their iridium-tantalum catalytic coating wears thin and they no longer meet plating performance, most PCB manufacturers treat them like regular scrap titanium mesh.
That’s a costly mistake. The thin, black, iridium-rich coating on your spent mesh contains platinum-group metals far rarer than gold. Iridium alone is one of the scarcest elements on Earth — crustal abundance only 0.001 ppm, global annual production barely 7–10 tonnes, and market value has reached historic highs in 2026. A 2 kg mesh of plain scrap titanium might sell for $10, but that same spent MMO titanium anode from a PCB plating line can be worth hundreds, even thousands of dollars once you account for the precious metal layer.
We’ve seen countless PCB factories sell pallets of these high-value spent anodes for generic scrap titanium prices — losing up to 95% of their real recoverable value. Worse, they send complex platinum-group metal-bearing material down general waste streams, creating unnecessary environmental risk while missing a large, untapped revenue stream from their electrochemical process consumables.
- Over 12 Years Specializing in PGM Anode Recovery
- ICP Assay Certified • 95%+ PGM Recovery Rate
- Same-Day Settlement • Worldwide Pickup
How Much Is Your Spent Mesh Worth? — Indicative Value Bands
What We Recycle From Printed Circuit Board Factory
We specialize exclusively in the full spectrum of spent titanium anode materials generated by modern PCB electroplating and copper recovery operations — no job is too large or too small.
MMO Anode Mesh
The standard insoluble iridium-tantalum coated expanded titanium mesh used for vertical conveyorized plating (VCP), horizontal pulse plating (RPP), and deep-hole copper plating lines in advanced PCB manufacturing.
Platinized Titanium Anodes
Spent platinum-coated titanium mesh and plate anodes used for gold plating, precious metal electroplating, and specialized plating baths in high-end PCB and finishing processes.
Titanium Basket Assemblies
Complete titanium mesh baskets removed from plating tanks, whether intact, deformed, partially coated, or cleaned — we recover both the substrate and any residual precious metal loading.
Our 5-Step Transparent Recovery Process
No hidden fees, no arbitrary deductions — every batch is tracked and priced with full transparency from start to finish.
Free Site Survey & Material Sorting
Our technical team visits your facility to inspect your spent anodes, separate fully intact coated meshes from heavily corroded or damaged batches, and categorize material types before sampling to preserve maximum value.
Precise XRF Screening & Representative Sampling
We use X-ray Fluorescence (XRF) to screen every lot on-site, then collect multi-point stratified samples across the entire container. The sample is split, sealed, and co-signed by your team and ours for full auditability.
ICP Laboratory Assay
The sealed sample is sent to our independent laboratory for microwave digestion and ICP-OES analysis. We measure the exact iridium, ruthenium, platinum content in your material, dry-weight basis, with results documented in a certified report.
Closed-Loop Refining & Recovery
Through electrochemical selective stripping of the oxide coating, dosed-chlorine distillation, and multi-stage solvent extraction, we achieve >95% iridium recovery and >96% ruthenium recovery. The cleaned titanium substrate is then recycled for reuse in new manufacturing.
Transparent Settlement & Payout
Once the ICP assay report is finalized, we calculate your payout strictly based on that day’s live PGM market benchmark prices. We issue payment the same day via wire transfer — no net terms, no delays, no deductions not agreed upfront.
Frequently Asked Questions
What exactly is a spent titanium anode mesh from PCB manufacturing?
These are Dimensionally Stable Anodes (DSA / MMO) — expanded titanium meshes coated with a thin layer of iridium-tantalum or ruthenium-iridium mixed metal oxide, installed in PCB plating lines as highly efficient, non-dissolving anodes for copper electroplating. When their catalytic layer wears out and they no longer maintain uniform plating performance, they are classified as spent scrap.
Do you accept very small quantities or only full truckloads?
We handle everything from a single lab-sample mesh you want to assay, all the way to 20-ton full-container-load decommissioning projects. There is no official minimum, though we do offer extra preferential rates for pallet and full container volumes.
Can you arrange pickup and transportation internationally?
Yes. Our global logistics team handles all the specialized packaging, dangerous goods declaration documentation, customs clearance, and door-to-door pickup coordination for PCB manufacturers anywhere in the world — you don’t need to arrange anything.
Why shouldn’t l just sell these to a local general metals scrap yard?
As our company recycles waste titanium anodes on a global scale, we can offer prices higher than those found in the local market—contact our recycling experts today.
How can I contact your experts?
You can call the number listed on our website, contact us via WhatsApp, or fill out an inquiry form with details about the type, quantity, and location of your scrap materials. Our experts will provide a quote as soon as possible, ensuring you get the best possible value for your scrap.